Single Skin Steel Sheeting

Steel sheeting, either box profile or corrugated, is a cost effective roofing product which is quick and easy to install.

  • Available in various profiles to suit your requirements or match in with your existing cladding
    Box profile supplied with a 1000mm cover when laid
  • Available in lengths up to 12m for box profile and 9m for corrugated
  • Available in thicknesses of 0.5mm (typically used for wall sheeting), 0.7mm (typically used for roof sheeting) and 0.4mm liner material (used for internal lining)
  • Available in plain galvanised, smooth polyester (factory painted), plastic coated (leather grain) finish or smooth PVDF2 finish
  • Box profile and corrugated sheeting can be curved to your requirements – ideal for Dutch barns
  • Can be supplied with an anti condensation lining applied to reduce the risk of condensation

Available in a wide range of standard and non standard colours,
please click here for our colour chart

Quantity discounts available – please call for more details

Things to consider:

  • What thickness do you require – generally 0.7mm is used on the roof and 0.5mm on the walls, but if the purlins are close together (or if it is a temporary building) you may be able to use 0.5mm which will offer a cost saving. Alternatively some people use 0.7mm thick on the walls as it is stronger
  • What finish do you want – plain galvanised is the most cost effective, but may not blend in with the surroundings; polyester coated sheet is a cost effective coloured sheet, but care should be taken when putting it up as it can be scratched; plastic coated sheet is very durable and comes in a wide range of colours; PVDF2 is a high performance architectural product available in metallic finishes
  • What is the longest length you can take and handle on site – single length sheets are generally easier and quicker to fix and reducing the number of end laps will the reduce the chance of water ingress. However, longer sheets will require larger vehicles to transport them – will they be able to access the site and have you the necessary equipment to handle long sheets safely on site?
  • If you are looking for corrugated sheeting, we supply 13/3 profile with 990mm cover width – older corrugated profiles eg. 10/3 or 8/3 have a cover of 762mm (2ft 6”) or 610mm (2ft) so you may require less sheets than you think
  • Box profile sheets are fixed in the troughs not on the crown using self drilling tec screws unless specifically asked for. Corrugated sheeting is fixed on the crowns
  • If the building is going to be used for livestock or storage, is condensation going to be an issue?
  • If yes, consider using box profile or corrugated sheet with the anti condensation lining, but the building will require ventilation at eaves and ridge for this to work and the fixing instructions must be followed.
  • Alternatively consider composite panel or Eternit fibre cement sheeting – these are by far and away the most effective products for reducing the risk of condensation

Box Profile Steel Sheeting

Claddex 24/1000

Cover Pitch Depth
1000mm 166mm 24mm

Claddex 30/1000

Cover Pitch Depth
1000mm 200mm 30mm

Claddex 32/1000

Cover Pitch Depth
1000mm 200mm 32mm

Claddex 34/1000

Cover Pitch Depth
1000mm 166mm 34mm

Corrugated Steel Sheeting

Claddex 13/3

Cover Pitch Depth
990mm 76mm 18mm